70% off Sale! Ends in %D days %H:%M:%S
Shop Now, Pay Later with Clearpay!
Free UK Delivery on all orders over £79.00
Airush Lift V3
Ask a question
The Airush Lift is all about boosting, hangtime, and taking performance freeride to new heights.
Designed for the rider looking for exceptional hangtime, explosive power and stability in the wildest conditions.
Ease of use, paired with incredible top end performance, makes the Lift the ultimate big air machine.
All new designed kite developed with the Airush big air team and an optional High-Y configuration for enhanced depower and control with five struts for stability in extreme conditions.
Simplicity without compromising quality, the Airush Ride Bar is the ideal companion.
An easy to use, reliable Aero cleat depower system with a tool-less position adjustment allows for the bar to be quickly and simply set up for riders with shorter reach. The durable EVA injected bar end floats are flexible for an overall better kite response and offer increased buoyancy.
Paired with any 4-line kite, the 24m flying lines, ISO 21853 aligned Airush IQR, and one-handed release and reset system complies with IKO and BKSA teaching standards with the Low-Y on the centre lines, allowing for a quick single line flag out.
Available in 2 colourways.
The Airush Load Frame featuring WebTech has been the key to setting the ultimate benchmark in durability, without compromising on weight.
By expanding our exclusive Load Frame with WebTech throughout the areas normally occupied by Dacron, we are able to minimize or completely remove the heavier fabric and utilize the Ballistic high-modulus polyethylene web fibers instead – increasing strength and minimizing weight.
WebTech minimizes or replaces the traditional Dacron reinforcing by channeling the broader loads into the Load Frame through a web “sub frame” of ultra-high-molecular polyethylene (Ultra High Modulus).
This is featured in key areas such as the primary attachment points on the leading edge or the rear attachment points, while also being used to support structural components such as the centre strut.
Central to the concept of the Load Frame are the lightweight Ultra High Modulus yarns, of which each single yarn can carry 40kg. Think of them as a lightweight web with engineered energy absorption under load, similar to a spider web.
These yarns are integrated into the canopy through reinforced taping that allows them to elongate when under extreme load, absorbing most of the shock that traditionally would have run through the canopy. At the same time, they carry the primary load of the canopy, preventing stretch and increasing long-term performance.
This premium fabric is designed with a high-density structure using high tenacity double-coated polyester yarn in a double ripstop configuration. The double coating protects the yarn as much as possible from UV and abrasion damage. This ensures that the canopy remains as crisp and responsive for as long as possible.
This exceptional material is used in conjunction with the Airush Load Frame, resulting in the ultimate combination of durability and performance.
The XL inflate/deflate valve features an insanely easy and fast way to inflate and deflate your kite.
The large opening creates maximum flow of air and reduces fatigue and stress on your pump.
This in conjunction with the Airush high-velocity pump makes inflating your kite extremely fast to get you on the water as quickly as possible.
Airush bumpers are found throughout the leading edge of the kites to reduce wear and increase durability on rough surfaces.
These bumpers are key for increasing the lifespan of Airush kites.
Kevlar, found in bulletproof vests, is found throughout the Airush kites.
These Kevlar reinforcements are only put in the most critical areas to protect from wear and tear while still minimizing weight that affects the kites performance.
The oversized SPS valve (Single Point Inflation System) optimizes inflation and deflation.
The Fast Bladder Inflation (FBI) features increased wall thickness and oversized diameter tubing, thus eliminating tube kink, reducing stress on your pump, and enabling quick and easy inflation.
The SPS cover supports the tubing, further limiting UV damage to the material and preventing over flexing when packing.
The V3.2 bridle system, now 10% shorter, contributes significantly to the turning speed and performance of supported leading edge kites. In addition, the total depower adds immensely to the safety benefits.
The Airush Pulleys are made of tough Zytel material for high strength and resistance to abrasion and impact, the Airush Pulley has the pigtails hole directionally correct to eliminate bridle wear. With a breaking strength of 550 kg, the Airush pulley was designed specifically for use on all Airush kites.
Simple and strong power bracket with integrated pulley – reduced lines and clutter, less friction for easier adjustment.
Simple, lightweight cleat system with tool-less position adjustment – allows for the bar to be quickly and simply set up for riders with shorter reach.
Neat and tidy trim handle, easy to grip with low swing weight, and added velcro for a decluttered feel.
Strong, reliable, and serviceable 5mm Dyneema Depower Main Line, with 4mm safety core for extra piece of mind. (2000kg breaking strain)
Simplified leader lines with internal adjustment for fine-tuning.
Molded EVA bar floats, for better bar float, more flexible grip, and better kite response.
High-strength 316L stainless steel centre fitting with ergonomic centre hole for better kite response, flush profile for easier grip, and no black oxide issues in sandy locations.
Industry leading, The Airush IQR Quick release system complies with the ISO Standard 21853. Kitted with a medium loop and security pin. Easily released with a single hand, when you need to. The IQR is simple, reliable and easy to reset, giving you peace of mind in all conditions.
Simplified leash ring with increased hole size for leash attachment.
Sanded and embossed finish for high grip.
24m Total = 1m Leader Lines + 14m Lower lines + 9m Upper lines.